ULVAC VACUUM > Other Vacuum Parts > Flanges > UFC Series Ultra-High Vacuum Flanges(Fix)
UFC Series Ultra-High Vacuum Flanges(Fix)
The UFC Series are knife-edge metal-seal bakeable flanges for ultra-high vacuums.
- • Metal seals make flanges clean and enable low levels of outgas, ideal for ultra-high vacuums.
• Edges have original ULVAC long-life design that can withstand repeated connections.
• Welded parts of flanges and connection pipes have low weld distortion in the seals.
• Two types are available : fixed and rotating. Fixed flange bolt holes are available as either through holes or tap holes.
• Connect to pipes with diameters of between 6.35 and 254 mm.
- • Flanges on ultra-high vacuum systems, ultra-high vacuum devices
| Operating pressure range | Atmospheric pressure to 10-10Pa |
| Operating temperature range | -196 to 450ºC |
| Material | Austenitic stainless steel |
| Compatible gaskets | Copper gaskets : UFC-G Series |
CAD data Download
At ULVAC, you can download CAD data (DXF files) for some of our products.(Internet Explorer Ver. 5.5 or newer)
Downloading is only available if you have completed User Registration (free).
Adobe Acrobat Reader (Ver.6 or a later version)is required to open PDF files.
Once we have received your registration, we will send you a password by email.
>> Caution <<
*This download system can be used with the common ID and password for ULVAC's website ulvac.co.jp/eng/.
* If you do not receive your password within 1 hour, please try registering again.
Please note that IDs and passwords are subject to change without notice.
If you are unable to access the download area with an ID and password
that you received in the past, please complete User Registration again to get your updated ID and password.
* Please note that DXF files and PDF files contain Japanese characters. Please also note that, depending on the PC/CAD environment,
files may not open, be displayed or be able to be used correctly.
* Please note that, because the conversion to DXF format is not
fully compatible, there may be problems such as garbled characters or layout misalignments.
* Due to product improvements, CAD data is subject to change without notice.
* ULVAC will not assume any responsibility whatsoever for any direct or indirect damages resulting from the use of this data.
