ULVAC VACUUM > Vacuum Gauges > Display > G-tran series 1CH Display Unit ISG1
G-tran series 1CH Display Unit ISG1
 |
||
|
||
|
This unit is a 1channel vacuum gauge display, compatible with all G-TRAN series, as well as CCM-A series. By connecting with sensor unit, it enables users to configure measuring pressure reading, pressure interface, and other settings with ease. Also this display shows all the activities and status, which user can observe at one glance. At last this monitor complies with CE marking, and RoHS directive.
- • Compatible with all G-TRAN series, and Capacitance Manometer CCM-A series.
• Pressure is 0 to 10V linear output
• 3 set- point output
• Operates in DC 24V power inpu
• Monitor is easily viewable LED
• CE marked鐚熊ree of hazardous materials (RoHS directive)
- • For vacuum systems which require pressure monitoring.
• For systems which require many set points.
• For systems with RS-485 equipped
| Name | G-tran series 1CH Display Unit |
| Type | ISG1 |
| Compatible Senser Units | SW1, SP1, SC1, BPR2, BMR2, CCMT, CCMH |
| Conenectable Senser Unit | 1 unit |
| Display | Significand 2digit/Exponent 1digital縲笆｡.笆｜�10笆｡ |
| Operating Tempereture Range ºC | 10 to 40 |
| Power Supply Voltage | DC24V ± 1V |
| Weight g | 250 |
CAD data Download
At ULVAC, you can download CAD data (DXF files) for some of our products.(Internet Explorer Ver. 5.5 or newer)
Downloading is only available if you have completed User Registration (free).
Adobe Acrobat Reader (Ver.6 or a later version)is required to open PDF files.
Once we have received your registration, we will send you a password by email.
>> Caution <<
*This download system can be used with the common ID and password for ULVAC's website ulvac.co.jp/eng/.
* If you do not receive your password within 1 hour, please try registering again.
Please note that IDs and passwords are subject to change without notice.
If you are unable to access the download area with an ID and password
that you received in the past, please complete User Registration again to get your updated ID and password.
* Please note that DXF files and PDF files contain Japanese characters. Please also note that, depending on the PC/CAD environment,
files may not open, be displayed or be able to be used correctly.
* Please note that, because the conversion to DXF format is not
fully compatible, there may be problems such as garbled characters or layout misalignments.
* Due to product improvements, CAD data is subject to change without notice.
* ULVAC will not assume any responsibility whatsoever for any direct or indirect damages resulting from the use of this data.
