ULVAC VACUUM > Vacuum Pumps > Titanium Getter Pumps > GGT-3 Power Supply for Titanium Getter Pumps
GGT-3 Power Supply for Titanium Getter Pumps
GGT-3 is a control power supply for powering titanium getter pumps and sublimating titanium.
- • Provides the optimum output characteristic for using ULVAC's PGT Series of titanium getter pumps.
• Enables unmanned intermittent operation with power ON and OFF times set to any value between 0.05 second and 300 hours.
- Power supply for main evacuation pumps (PGT Series) for ultra-high vacuum equipment
| Output | 0 to 6 VAC (variable), 60 A max. |
| Control method | ON/OFF controlled by timer |
| Timer set time | 0.05 second to 300 hours (both ON and OFF) |
| Output display | Output current display |
| Output display gradations | Analog display/60 A full-scale |
| Number of interlock inputs | 1 |
| Permitted ambient temperature | 5 to 40ºC |
| Input voltage/frequency | Single-phase 200 to 220 VAC, 50/60 Hz (switched) |
| Input current | 3.5 A max. |
| Weight | 12kg |
CAD data Download
At ULVAC, you can download CAD data (DXF files) for some of our products.(Internet Explorer Ver. 5.5 or newer)
Downloading is only available if you have completed User Registration (free).
Adobe Acrobat Reader (Ver.6 or a later version)is required to open PDF files.
Once we have received your registration, we will send you a password by email.
>> Caution <<
*This download system can be used with the common ID and password for ULVAC's website ulvac.co.jp/eng/.
* If you do not receive your password within 1 hour, please try registering again.
Please note that IDs and passwords are subject to change without notice.
If you are unable to access the download area with an ID and password
that you received in the past, please complete User Registration again to get your updated ID and password.
* Please note that DXF files and PDF files contain Japanese characters. Please also note that, depending on the PC/CAD environment,
files may not open, be displayed or be able to be used correctly.
* Please note that, because the conversion to DXF format is not
fully compatible, there may be problems such as garbled characters or layout misalignments.
* Due to product improvements, CAD data is subject to change without notice.
* ULVAC will not assume any responsibility whatsoever for any direct or indirect damages resulting from the use of this data.
