ULVAC VACUUM > Gas analyzers > Gas analyzers > Software for Gas Analysis Qulee QCS

Software for Gas Analysis Qulee QCS

Adobe Acrobat Reader(Ver.6 or a later version)is required to open PDF files.

Qulee QCS is a software for gas analyzers and process monitors of ULVAC. This software has basic functions for gas analysis and process monitoring; peak-intensity monitoring, leak testing and recipe-based monitoring. The operation of the data acquisition and the saving data is carried out by simple clicking. The software includes another functions in addition to basic functions; background subtraction, measured area integration, data saving as CSV format, and controlling more than one sensors through RS485-interface. "Qulee QCS" suits for various needs such as gas analysis, process monitoring, and research and development. Our old model, that includes QCS 2001 or MSQ-400, MM200 etc., can upgrade to "Qulee QCS".

• Easy operation with enhanced short cut button.

• Simultaneously control of up to 8 units (in free combinations of models)

• Measurement-condition control by recipe setting

• Easy leak check in the helium leak test mode

• Simultaneously recording analog data in 2 channels

• Setting 2 points for partial pressure set point output (in the trend-mode measurement)

• Includes background subtraction and measured area integration

• Saving a data as a data format that can be loaded into spreadsheets (CSV format)

	Specifications
Model	Qulee QCS
OS	Windows 98, 2000, XP, Vista
Interface	RS-232C/485 (via a converter for RS-485)
Sensor Number	Free combination of up to 8 sensors of various models (with RS485)
Sensor model	REPROS/SEPION/STANDAM/ST-400
Recipe	100 (70 in the user area)
Sweep speed	50, 100, 200, 500, 1000, 2000 msec/mass
Sampling interval	Auto, 0.5 - 1000 sec (in the trend mode) 1 - 1000 sec (in the scan mode)
Measurement end time	Continuous, or free setting
Measurement mode	Scan mode : Measuring the mass spectrum in various mass range (model dependent)
	Trend mode : Measuring partial pressure to time up to 20 channels
	Leak-test mode : One-touch helium leak testing
	Analog mode : Analog wave measurement for mass number calibration
	Sensitivity-calibration mode : Calibration of the sensitivity of the SEM detector
	DEGAS mode : Controlling the electron bombardment type outgassing of ionsource (only SEPION)
Indication of gas composition name	Able to indicate the gas composition name in scan and trend modes
Function	Background subtraction Integration of measured area
Analog Input	0 - 10V (2 points)
Set-point	Partial pressure set-points in 2 channels (Error and warning)(only in trend mode)
Electron energy for ionization	20 - 70eV (only REPROS), fixed (only in sensor-built-in type)
Status Check	Error detection (communication error, filament break, RF error, interlock) Total running time of Filament and SEM
Display	Vertical axis : Linear and the logarithmic selectable. Display range selectable [Current (A), partial pressure (Pa), concentration (ppm)]
Display	Horizontal axis : Mass number (scan mode and analog mode) and time (trend mode). Able to change and scroll the Horizonal axis range. Indicate saved data (able to indicate saved data during measurement) Bar chart and line chart is simultaneously indicated.
Data save	Auto save, or saved after measurement The file is named by combination of time and date at starting point of measurement. (Auto save). Filename is selectable. Saving place can be set. File can be converted to CVS format. Record of sensitivity calibration can be saved in text format.
Print data	Graph displayed in scan, trend or analog mode can be printed. Setting screen range to be printed Setting data color & radius of trend graph
Option	RS-232C/485 converter, PC
Recommendation of PC	HDD : 2 MB (except measurement data), RAM: 128 MB or more
Recommendation of PC	CPU : Pentium 200 MHz or higher, display area: 800 x 600 or more, COM port, CD-ROM drive