ULVAC VACUUM > Other Vacuum Parts > Each Feedthroughs > TSU Series Ultra-High Vacuum Linear Feedthroughs
TSU Series Ultra-High Vacuum Linear Feedthroughs
The TSU Series are linear feedthroughs enabling objects in vacuum chambers at ultra-high vacuum pressure to be moved linearly from the vacuum system's atmosphere side. When the handle on the atmosphere side is turned, the shaft on the vacuum side moves in a linear direction.
- • Low outgas emission, ideal for ultra-high vacuums.
• Bearings, and mechanism for converting rotation to linear movement are on atmosphere side, enabling lubricant-free components on vacuum side.
• Each complete turn of handle corresponds to 1 mm movement of shaft, enabling fine adjustments.
• Can be fixed at any position.
- • Manual linear movement in ultra-high vacuum systems
| Model | TSU-15FM | TSU-15F | TSU-40F |
| Linear movement distance | 15mm | 40mm | |
| Linear movement distance per complete turn | 1mm/rotation | ||
| Smallest calibration | 0.05mm | 1mm | |
| Drive shaft diameter | M6 | 8mm diameter | |
| Connecting flange | UFC034 | UFC070 | |
| Weight | 0.7kg | 1.2kg | 1.4kg |
| Leak rate | 1.3 x 10-11 Pa·m3/s max. | ||
| Heating temperature | 150ºC max. | 250ºC max. |  |
CAD data Download
At ULVAC, you can download CAD data (DXF files) for some of our products.(Internet Explorer Ver. 5.5 or newer)
Downloading is only available if you have completed User Registration (free).
Adobe Acrobat Reader (Ver.6 or a later version)is required to open PDF files.
Once we have received your registration, we will send you a password by email.
>> Caution <<
*This download system can be used with the common ID and password for ULVAC's website ulvac.co.jp/eng/.
* If you do not receive your password within 1 hour, please try registering again.
Please note that IDs and passwords are subject to change without notice.
If you are unable to access the download area with an ID and password
that you received in the past, please complete User Registration again to get your updated ID and password.
* Please note that DXF files and PDF files contain Japanese characters. Please also note that, depending on the PC/CAD environment,
files may not open, be displayed or be able to be used correctly.
* Please note that, because the conversion to DXF format is not
fully compatible, there may be problems such as garbled characters or layout misalignments.
* Due to product improvements, CAD data is subject to change without notice.
* ULVAC will not assume any responsibility whatsoever for any direct or indirect damages resulting from the use of this data.
